SXKK5020-6 Guild Rail Shot Blasting Machine

SXKK5020-6 Guide Rail Shot Blasting Machine
For Cleaning Guide Rail & Rail

This machine is mainly used for cleaning the surface of guide rails. By shot blasting, rust and oxide coat will be removed away and you will get a qualified surface of Sa2.5 and certain roughness. This will intensify the steel, improve the antifatigue capacity, add the adhesion of paint film and finally improve the inner and outer quality of steel.
The work pieces delivered by rollers into shot blasting chamber will accept hit and cut by steel shot accelerated by blasting turbines. After shot blasting, the rust and oxide coat will be cleaned off. Then the work pieces will be sent out of chamber.
Processing flow: load on in-feed rollers→ delivery-in→ shot blasting→ delivery-out→ unloading. 

Blasting Chamber Open Size

500×200mm

Working Speed

0.5~25m/min

Blasting Turbine 

Model 

Q035

Quantity

4 sets

Shot blasting capacity

290 kg/min ×4

Power

18.5kw × 4

Model 

Q035

Quantity

2 sets

Shot blasting capacity

330 kg/min ×2

Power

22kw × 2

Dust Removing System 

Model

BD-48

Fiber Bag filter

Φ190× 2000mm

Fiber Bag filter Quantity

48 pcs

Dust Cleaning Type

Pulse Jet

Dust Emission Density

≤150mg/m3

Air Volume

22,000 m3/hr

Model

LT-15

Cartridge Filter

Φ325 × 1100mm

Cartridge Filter Quantity

15 pcs

Dust Cleaning Type

Pulse Jet

Dust Emission Density

≤50 mg/m3

Air Volume

22,000 m3/hr

Centrifugal Air Fan

30 kw

Quantity

1 Set